tick over
Mon, 25/05/2009 - 16:45
Hi,
How do i lower the tick over ? is there a screw or something i can adjust, on the pump. The throttle cable is fine, the cab warm up knob is fine, i just need to lower the revs when warm.
Thanks
Mon, 25/05/2009 - 19:58
#1
Re: tick over
the accelerator pedal is linked to the pump rack lever with adjustable rods! the cable is the hand throttle...at the rear of the pump is a square ended shaft with a 13mm lock nut..slacken the nut and with the engine hot and running rotate the shaft.... in for faster. out for slower... 700/800rpm is where you should be at..if it starts lumpy and smoky when cold fit a new set of heater plugs and check the timing of the relay 8 to 12 seconds of amber light depending on the ambient temperature.....
Thank you bud, i done & balanced the cable, tickover &cabin idle knob. Superb diffrence. :D