Sill Logo
Feel a bit guilty asking this but here goes... does anybody have access to wiring diagrame or drawing that shows wiring and components for the led M/B logo that comes on in the aluminium sill when you open the door on the G500 as one of mine aint working and want to replace. I know its not essential to good off road but hey I like them :lol:
I think you should find the wires hook up to the door switch at the 'A '-pilllars.
Regards,
Feel a bit guilty asking this but here goes...
Don't worry. It could be much worse. You could be into crossdressing! :lol:
Hmm am replacing the little black cube that I think has something to do with ..... :lol:
My memory is hazzy on this, now you mention the little black cube, I have replaced these in the past, these do seem to be a weak point in the system, try swopping with the working side to see if this works.
Lifting the kick panel, you will notice the wiring to the lamp is fragile and delicate pay attention to these, water under the kick panel affects the function of the lamp and cleanleness of the contacts.
Take care, if the power is on and you fiddle with dirty contacts there can be a bit of sharp shock, a little more than the accidental shocks you sometimes get touch your car and you earth out.
Regards,
That was quick. I didn't have time to ask for photos as I want to dismantle mine sometime. They are not working both sides. What's the repair then?
Hmm am replacing the little black cube that I think has something to do with voltage regulation to the led thingy so maybe need to go further back in loom, just need some guidence before start dimantleing/removing trimm etc.
And whats wrong with crossdressing morriston? As long as you remember to gather your skirts in before you close the door it's not a problem, and need I point out how useful a pair of tight can be! not that I wear them so frightfully common stockings only for me! :lol: