Mortinson
Can you help with the part number for these? The dealer seems to be stuck.
http://www.gwoa.co.uk/index.php?name=Forums&file=viewtopic&t=6180
This might help Dan..
http://cgi.ebay.de/Mercedes-G-GE-GD-W463-Schmutzfaenger-Halter-mud-flap-...
Thanks Fred, I am looking for the front ones though.
I would very gladly help if you send me your VIN. Cheers
I gather that the problem is that you G did not come out of Graz with front aprons... that's why he cannot find the parts (EPC gives "Callout is not valid for this SA").
Therefore he needs the VIN of a GWagen that came out of the factory with front mud aprons. Give him this one: WDB46033217033598 (that's my former 300GD), and ask him to got to FH88 "Attachment Parts" and then choose SA59009 "Mud Aprons" >> "Front; for Wide Tyres".
From there you'll get the drawing with all the parts, there are at least three small brackets you need plus all the nust and bolts, that's why I'd rather have your friendly MB dealer look it up for you.
Good luck
But EPC does not seem to reflect the bracket that goes around the round outrigger from the chassis.. because what is shown in not strong enough; I have what is shown from ebay.. but only the rusty loop that some replace with a Jubilee clip..
Oh and tell them
Body
88 Attachment Points
59009 Mud Aprons.. first picture of 3 as below;
MB have come back with the same point. Does anyone else have a 460 which left the factory with the front mounted mudflaps (hoops around the pipes which lead off the chasis just behind the front wheel)? If so can they post the VIN so MB can run it.
Thanks.
Read my previous message:
I gather that the problem is that you G did not come out of Graz with front aprons... that's why he cannot find the parts (EPC gives "Callout is not valid for this SA").
Therefore he needs the VIN of a GWagen that came out of the factory with front mud aprons. Give him this one: WDB46033217033598 (that's my former 300GD), and ask him to got to FH88 "Attachment Parts" and then choose SA59009 "Mud Aprons" >> "Front; for Wide Tyres".
From there you'll get the drawing with all the parts, there are at least three small brackets you need plus all the nust and bolts, that's why I'd rather have your friendly MB dealer look it up for you.
Good luck
Thanks Fred, I am looking for the front ones though.