280 M110 torque settings

I know nothing but figs from a Peter Russek pocket mechanic gives no torque data for the 110 but for the 616/617 it gives (all in foot/pounds as I am old fashioned ) as
Exaust manifold to Cylinder head 22.
sump plug M26 35
Sump plug M12 29
centre bolt and nut on oil filter cover 14.5 to 18
oil filter to crank 22
Flywheel or driven plate 22 to 30 then angle tighten by 90 to 100 degrees.

I cannot guarantee any figs and also could not find any rocker cover figures. I muddled through a website called clubGwagen.com and followed links to mercworkshop.com and found lots of useful information. My biggest problem is getting simple info like location of fuses and how do you get at the sunroof motor to name but two Good luck gary in Arborfield laso a 280GE 1987 owner :?:

Rocker cover gasket (inc 3 centre bolts)
Sump bolts (large sump)
Sump plug
Flywheel to torque converter bolts
Exhaust manifold bolts
Oil filter assembly mounting bolts

Do you still need these?

According to haynes(all in lbf ft):

Rocker cover gasket (inc 3 centre bolts)...4
Sump bolts (large sump).........................8
Sump plug.............................................30
Flywheel to torque converter bolts............22to30(flywheel/driveplate)
Intermediate plate..................................37
Exhaust manifold bolts............................15to18
Oil filter assembly mounting bolts.............26

Post again if you need more :wink: