goodridge brake hose kit......

5 replies [Last post]
Scc28
Scc28's picture
Offline
Joined: 31.08.2006
Location: manchester
GWOA Groups: Members

does anybody know the correct brake hose kit for a 460 with 2 hoses to each front caliper?

many thanks simon

Russ280
Russ280's picture
Offline
Joined: 06.11.2003
Location: Trefonen
GWOA Groups: Members
Re: goodridge brake hose kit......

You used to be able to get them off the GWOA. Maybe you still can?

Part No = SME0801-5P

Russ

Roly
Roly's picture
Offline
Joined: 07.11.2003
Location: Australia
GWOA Groups: Members
Re: goodridge brake hose kit......

Yes the club still has them. Try Howard, Midlands rep. No in magazine

mgrays
mgrays's picture
Offline
Joined: 08.11.2005
Location: Aberdeen Scotland
GWOA Groups: Members
Re: goodridge brake hose kit......

So twin front hoses = 5 part = Goodrich SME0801-5 @ £55
460 / 461 chas 055306 / 903695

3 part 463 = Goodrich SME0800-3 @ £33

Both on E-bay at the moment at about £11/hose in kits.

... so what does a 460 with single front hoses use ('89 chassis 58000 odd so it should be in the start of the twin hoses) ... is it a 463 kit? .. or do you throw 2 of the 5 part hose kit away? :roll: (hate to waste stuff!)

And... so are single hose Brembo and twin hose Lockheed calipers?
(putting "Iveco daily 35c13 vans are the same calliper and pads" and looking for a right vintage Iveco 35 here http://www.brakesinternational.co.uk/ )

Howard Green
Howard Green's picture
Offline
Joined: 09.11.2003
Location: Kings Sutton, Banbury, Oxon
GWOA Groups: Members
Re: goodridge brake hose kit......

Yep, pete is correct the club have both sets of pipes. The 460 should have three or five pipes and the 463 three pipes as a rule.

As for price, 460 five pipe £75 463/460 three pipe £55

Regards

Howard

mgrays
mgrays's picture
Offline
Joined: 08.11.2005
Location: Aberdeen Scotland
GWOA Groups: Members
Re: goodridge brake hose kit......

So .. are the rear 463 hoses different to a 460?

I got a 3 hose kit. The fronts are perfect for a 3 hose 460. The rear is too short compared to the non OEM ones bodged to fit on my car and definitely look too short; it fits but the top fitting is not right for bracket/clip and the axle fitting does not use the supplied copper washer so I guess it is wrong.

Does the club make any profit from those hoses and is that inc P&P .. don't mind supporting club now I am a member! (and ebayer was not that responsive to emails before I got delivery :cry: )