another new owner
Hi all.
Just a quick intro!!!
I have joined you all today from the village of Weston in Hertfordshire, and i have recently obtained a G500 just 10 days ago, in fact the V5
has not yet arived back from DVLA, anyway this is just a short intro as i have got to take it to the petrol station again!
No doubt will bump into some of you soon.
Best regards to you.
Nice looking G. Well done
Nice; I didnt see that for sale anywhere? Is it RHD?
looks a lovely specimen....! that was obviously a secret sale as i didnt see it on the net.
can we see more pics and the engine bay and interior please ? V8 loves to rumble. it sounds great in sure.
spider will be hanging around here soon.... :)))
enjoy it !!
rgds hus
irs RHD..i can see.
Lovely. 9 seater too.
Is it the one David Ramsey is/was selling on Autotrader?
Boo Yah! Another LWB RHD!
Welcome to the Wood, Carpet and leather brigade (Power division). A very rare (and best) beastie!
Spider1V
Another G in the village noooo!
It's lovely Mr Cope best regards Dave
The.copes,
Can you do me a favor and take a photo, when you have time, of the bit by the gear stick, it maybe the light, but I see some extra buttons? Multi function was an option pre 2000/1, but standard after. Do you have the blue lit sills?
Nice motor!
Spider1V
Nice G. The m/f wheel came out in mid '99. Do you have to put you foot on the brake to move out of park? That seemed to coincide with the new dash and MF wheel. Caversham was the importer in '99 before MBUK took over. V5 classifies them as imports.
Joe I think those buttons are for alarm cut out for when the vehicle is being recovered on a flat bed lorry a totally unnecessary addition :) and heated windscreen
Nice wagen and welcome to the forum!
Interior (including steering wheel) looks identical to my G500 SWB which is a 1999 model.
Ow no he reads the Sun
i knew i knew this G500. i was tempted with it in early 2000...
enjoy it !
rgds hus
Welcome, Blue Fin!
Any chance you received an owner's manual for yours? Still trying to find one in English for mine.
Out of interest, what functions does the MF steering wheel provide?
Control of:
The front cill lights illuminate, but not the rears (standard). Pic attached of mine. They are switched on when the front door is opened. They are prone to failure, not the light but the invertor which powers it. The invertor is located behind the low side kick panel and can be removed by pulling the wires out of the door bellows. It depends upon your skills with electrics as to whether you want to try to fix it yourself, pay someone or leave it as is. I picked up a generic invertor for £3 a few years ago and soldered it in place of the factory one, still works today. They run at about 120v ac. You don't need to remove the light from the vehicle to repair the invertor.
There's an invertor on each side behind the panel. But there are two skins of steel behind the panel so it's not easily accessible from there, but it allows the cables to be moved more easily. Description below is for 1 side.
The cables running through the bellows can be slowly pulled out (towards the door) and it will come out with them. The inv is about 1" cube wrapped in foam. The cable wrapping tape used for the looms goes sticky with age so the whole episode is pretty messy. MB sells them for £40 ea odd, so if you want to play safe you can buy it and plug directly in to the existing circuit. But if you are confident with electrics then buy a generic one and have a go.
If you bellows are split you can replace that whilst you are in there.
Thanks Blue Fin. Wow, I am envious of those manuals. I'd love to have a hard copy but would be happy with PDF versions of them too, and the interior owner's manual would be particularly nice to get me started. Mine is a 1999 and the ones I've found online so far seem to be for much later models or, at best, all inclusive of model years.
Blue Fin,
Just another thought about the manuals since I responded too quickly without thinking it through. Maybe posting them on hte private members side of this site might help others who have our year/model trucks.
PN 45 looks like the lights them selves, the inv don't appear.
But to be sure we need Gav to comment. He'll confirm and give the best price from a dealer.
What an attitude from the dealer, turns away a customer.
Sorry guys..
Disappearing up my own a*** with work stuff...
Quick look shows the same as the dealer..... just supplied some for a 2002 a few months back at that price as the lights worked but had letters missing etc..
Will have a GOOD look at the weekend over a beer or 6
Gav
A463 540 18 13 are the Sill Plates and Lights at £199.76 each + vat
I think the Inverter comes with the below cable loom listed as...
Cable Harness in front pillar, Connector, Inverter, Entrance Lamp
EPC lists A463 540 17 13 at £53.27 each + vat but MB Germany are showing as Special Order maybe 6-8 weeks
Gav
Sounds like the description.
All early 500s had them as standard. Can you post a pic of what you have removed.
UK price list attached
Thanks for the welcome all of you, and DaveO,what a coincidence,and you thought you were the only G in the village!